S-Vision Poly-HRP Conjugated Goat Anti-Rabbit and Mouse IgG (H+L), Ready to Use

S-Vision Poly-HRP Conjugated Goat Anti-Rabbit and Mouse IgG (H+L), Ready to Use

AO-03-G1303-10mL

S-Vision Poly-HRP Conjugated Goat Anti-Rabbit and Mouse IgG (H+L), Ready to Use

check En Stock
Hurry! only 10 items left in stock.
99,00 €
HT
Quantité

II-E9 III-B6

Product Information

Product Name

Cat. No.

Spec.

S-Vision Poly-HRP Conjugated Goat Anti-Rabbit and MouseIgG (H+L),Ready to Use

AO-03-G1303-10ML

10mL

AO-03-G1303-100ML

100mL


Product Description

This productutilize a dextran backbone towhichmultiple HRP enzyme and antibodies molecules are conjugated. This polymer creates a highly sensitive,readily available and one-step non-biotin detection system for immunohistochemical and immunocytochemical staining.This system avoids the use of streptavidin and biotin,and therefore eliminates non-specific staining as a result of endogenous biotin..It has a wide adaptability to sample processing, reducing the variability caused by different tissue processing methods.The reagent is ready-to-use, which does not need to be diluted to obtain the best dyeing ratio, reducing experimental operation errors.


Storage and Shipping Conditions

Wet ice packs for transportation,store at2-8℃ for 12 months.


ProductContent

Component Number

Component

AO-03-G1303-10ML

AO-03-G1303-100ML

AO-03-G1303

S-Vision Poly-HRP Conjugated Goat Anti-Rabbit and MouseIgG (H+L),Ready to Use

10mL

100mL

Product Manual

1份


Staining Process

1. Manually IHCStaining

Procedures

 Reagent

Protocol

Dewax

BioDewax and Clear Solution (RecommendationG1128)

The sections were placed in BioDewax and Clear SolutionⅠ10min-BioDewax and Clear Solution Ⅱ10min-BioDewax and Clear Solution Ⅲ10min-absolute ethanolⅠ5min-absolute ethanolⅡ5min-absolute ethanol  5min-wash inpure water.

Antigen Retrieval

Citrate AntigenRetrieval Solution pH6.0(RecommendationG1202)orEDTA Antigen Retrieval Solution pH 9.0 (RecommendationG1203)

Microwave HeatingHeating to boiling,maintain a temperature above 98℃ for 15-20 min,and cooling to room temperature;

Pressurecooker heating: Heat in the pressure cooker to air injection for 2 min;

Note: The repair time is also related to the fixed time and the antigen epitope,so the conditions can be explored.

Blocking of the endogenous peroxidases

3% Hydrogen peroxide

Dipping orincubate at room temperature for 10min. Wash the slide in PBS (pH 7.4) on a shaker 3 times for 5min each time.

Blocking

BSA (RecommendationGC305010)

The 3% BSA working solution was prepared,and the tissue was completely covered by drops,and incubated at room temperature for 30min.

Primary antibody

commercializationPrimary antibody

Add aworking solution to completely cover the tissue,usually 100 μL,and incubate at 4℃ overnight or 37℃ for 2 hours.

Secondary antibody

S-vision poly-HRP conjugated antibody

Drop this product until tissue is completely covered,usually 100 μL,incubated at room temperature for 20min.

DAB staining

 

DAB Chromogenic Kit (RecommendationG1212)

Add the prepared DAB working solution to completely cover the tissue and develop color for 5-10min.

Hematoxylin staining

Hematoxylin Solution(RecommendationG1004)

hematoxylin differentiation solution(RecommendationG1039)

hematoxylin bluing solution(RecommendationG1040)

Thesections were directly stained into hematoxylin staining solution for 3-5 min and washed with water; then stained by hematoxylin differentiation solution for 2-5 s and washed with water; hematoxylinbluing solution for1min and washed with water.

Dehydration andMounting

Mounting Medium

75% alcohol 5min-85% alcohol 5min-absolute ethanolⅠ5min-absolute ethanolⅡ5min- n-butyl alcohol 5min-xylene Ⅰ5min,Thesection were removed from xylene and mounting.

2. Automation in IHC

This protocol uses theServicebio IHC-48histochemical instrument for reference only. For other instruments,refer to the instructions for each instrument.。

: AO-03-G1303-10mL
: 10 Produits
Hurry! only 10 items left in stock.

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package

Procedures

Reagent

Protocol

Dewax

BioDewax and Clear Solution(RecommendationG1128)

Dewax at62℃for3min,repeated three times,Wash with absolute ethanol for 3 times and wash twice with pure water.

Antigen Retrieval

Antigen Retrieval Solution(For histochemical instrument)

Antigen Retrieval Solution(For histochemical instrument),Heat at 100℃ for 25 min and cool for 20 min.

Blocking of the endogenous peroxidases

3% Hydrogen peroxide

Incubate at room temperature for 10min.

Blocking

BSA(RecommendationGC305010)

The 3% BSA working solution was prepared,and incubated at room temperature for10min.