Immunohistochemistry Kit (Goat Anti-Rabbit IgG H&L (HRP))

AO-03-G1215-200T
This Kit is a highly sensitive two-step Immunohistochemistry kit, which is suitable for the primary antibody derived from Rabbit. The kit can be used in Western blot, and IHC applications. The color reaction principle is based on DAB reaction.
check En Stock
Hurry! only 10 items left in stock.
199,00 €
HT
Quantité

Product Information

Product Name

Cat.No.

Spec.

Immunohistochemistry Kit (Goat Anti-Rabbit IgG H&L (HRP))

G1215-200T

200 T




Description

This Kit is a highly sensitive two-step Immunohistochemistry kit, which is suitable for the primary antibody derived from Rabbit. The kit can be used in Western blot, and IHC applications. The color reaction principle is based on DAB reaction. Firstly, primary antibody of Rabbit origin binds to the antigen in test species. Then secondary antibody, Goat Anti-Rabbit IgG H&L (HRP) combined with primary antibody. Next, DAB interacts with HRP, because DAB is the substrate of horseradish peroxidase (HRP). Under the catalysis of HRP, DAB produces Brown precipitation to realize signal amplification and color development.




Storage and Handling Conditions

Transport by wet ice; Secondary Antibody storage at -20°C; DAB diluent and 50×DAB stock solution storage at 4°C; Valid for 12 months.




Component

Component Number

Component

G1215-200T

G1215-1

DAB diluent

12.5 mL

G1215-2

50×DAB stock solution

250 μL

G1215-3

Goat Anti-Rabbit IgG H&L (HRP)

100 μL

Instruction Manual

1 pc




Assay Protocol

Preparation

1. Self-prepared PBS (recommended G4202, G0002), Nucleus counterstaining reagent (recommended hematoxylin stain solution G1004, hematoxylin differentiation solution G1039

Hematoxylin returning blue solution g1040), gradient alcohol, xylene, sealing agent, etc.

2. Preparation of secondary antibody working solution: Goat Anti-Rabbit IgG H&L (HRP) was diluted with PBST (pH 7.2-7.4) in the ratio of 1:200 to obtain the secondary antibody working solution. Ready to use within 48 hours.

3. Prepare DAB color developing working solution: Add 20μL 50×DAB stock solution to every 1 ml DAB diluent , mix well and set aside. Prepared on demand, ready to use.

Operation Steps

1. According to the routine IHC steps, after dewaxing, antigen repair, blocking and primary antibody incubation, the tissue sections were washed with PBS three times for 5 minutes each time.

2. Secondary antibody incubation: add 50-100μL secondary antibody working solution on each slice,  completely covered the tissue and incubated at room temperature for 30-60 min. Wash three times with PBS for 5min each time.

3. DAB chromogenic reaction: add 50-100μL DAB working solution on each section, incubated at room temperature for several minutes. The color developing time is controlled under the microscope. To the desired effect, and then immediately wash with water to terminate the color development.

4. (OPTIONAL)Nucleus counterstaining: the sections are counterstained with hematoxylin stain solution for about 3-5 minutes; washed with tap water; differentiated with hematoxylin differentiation solution for 3-5 seconds; washed with tap water; treated with hematoxylin bluing solution; washed with running water for 3-5 seconds.

5. Dehydration and mounting: Sections were dehydrated by gradient alcohol in the usual steps, transparent with xylene, and sealed with neutral gum.




Note

1. If the background is too deep during the IHC chromogenic reaction, consider to extend the washing time, use appropriate blocking solution for mounting, inactive the endogenous catalase, shorten the chromogenic reaction time, reduce the concentration of secondary antibodies, etc. If there is no chromogenic reaction or the chromogenic reaction is too light, the concentration of primary antibodies and secondary antibodies can be properly increased, the chromogenic reaction time can be extended. Second, secondary antibodies were tested for normal color development.

2. DAB is harmful to humans, when operating be careful, and be protected from direct contact or inhalation

For Research Use Only!


: AO-03-G1215-200T
: 10 Produits
Hurry! only 10 items left in stock.

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package